ADC EMU-830 - Manual (Page 32)

Chapter 2: Installation September 25, 2006
2-10 LTPE-UM-3159-02
6 Configure the EMU for SNMP operation over SLIP (see “Configure SNMP Operation Over SLIP” on
page 3-10 ).
7 Configure the EMU modem parameters for remote alarm reporting. Refer to “Modem Parameters
(Configure and Test Dial-out Alarm Reporting)” on page 3-14 for details.
Figure 2-8. Modem to SLIP Port Cable Pinouts
Step Action
SD (Send Data)
RD (Receive Data)
RTS (Request to Send)
CTS (Clear to Send)
DSR (Data Set Ready)
GND
DTR (Data Terminal Ready)