ADC EMU-830 User Manual
Page 45
Chapter 3: Provisioning
3-13
Trap 1 Community String
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 1 Validation
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Trap 2 IP Address
Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Trap 2 Community String
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 2 Validation
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Trap 3 IP Address
Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Trap 3 Community String
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Trap 3 Validation
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
System Location
Field where you enter the physical location of the
system.
System Name
Field where you assign a name to the system.
System Contact
Field where you list the name, title, or phone number
of the system operator or administrator.
Option
Function