Emu installation, Emu installation -2, Emu i – ADC EMU-830 User Manual
Page 24
Advertising
2-2
EMU I
NSTALLATION
Install the EMU-830 in an EMS-830 as follows:
Step
Action
1
Use a flat-blade screwdriver to loosen the two screws holding the EMU slot faceplate (Slot 17) in place,
then remove the slot faceplate (
).
Figure 2-2. Removing the EMU-Slot Faceplate from EMS-830
EMU slot faceplate
EMS-830 shelf
Advertising