ATTO Technology 2500C - Manual (Page 4)

Contents
1 iPBridge 2500 provide storage options ............................................1
iPBridge2500 features
Connectivity, infrastructure solutions
1.1 ATTO iPBridge 2500R/D ......................................................3
Dimensions
Environment
Power
SCSI interface
Ethernet interface
Serial interface
LED indicators
Installation instructions
1.2 ATTO iPBridge 2500C ..........................................................6
Dimensions
Environment
Power
SCSI interface
Ethernet interface
Serial interface
Installation instructions
2 Configuring the iPBridge ..................................................................9
Microsoft iSCSI Initiator changes
2.1 Getting an IP address ..........................................................10
2.2 NDMP configuration provides backup ...............................11
How NDMP works
Setting up NDMP
Procedure
Assign NDMP names to devices
2.3 Mapping devices: NDMP .....................................................13
Map devices automatically
Map devices manually
Assign NDMP names to devices
2.4 Mapping devices: iSCSI .......................................................15
Node names
Single Target mode
Map devices automatically
Map devices manually
Multiple Target mode
Automatically configure Multiple Target mode
Manually configure Multiple Target mode