Appendix d safety standards and compliances, Fcc standards: radio and television interference, Canadian standards – ATTO Technology 2500C User Manual

Page 74

Advertising
background image

vii

ATTO Technology Inc. iPBridge Installation and Operation Manual

Appendix D Safety standards and compliances

The equipment described in this manual generates and uses radio frequency energy. If this equipment is
not used in strict accordance with the manufacturer's instruction, it can and may cause interference with
radio and television reception. Refer to the Technical Specification sheet available at

www.attotech.com

for a full list of certifications.

WARNING

Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used
batteries in accordance with your local environmental regulations.

No operator serviceable components inside the iPBridge 2500C/R/D.

Do not remove cover of iPBridge 2500R/D. Refer servicing to qualified personnel.

FCC Standards: Radio and Television Interference

WARNING

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply with the limits for
a Class A computing device pursuant to Subpart J of Part 15 of FCC rules, which are designed to
provide a reasonable protection against such interference when operating in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in
which case the user, at his own expense, will be required to take whatever measures may be
required to correct the interference.

If this equipment does cause interference to radio and television reception, which can be determined by
turning the equipment off and on, try to correct the interference by one or more of the following
measures

• Move the receiving antenna.
• Relocate the bridge with respect to the receiver,

or move the bridge away from the receiver.

• Plug the computer into a different outlet so the

computer and receiver are on different branch
circuits.

• If necessary, consult an ATTO authorized

dealer, ATTO Technical Support Staff, or an
experienced radio/television technician for
additional suggestions.

The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal
Communications Commission is a helpful guide. It is available from the US Government printing office,
Washington, DC 20402, Stock No. 004-000-00345-4.

Canadian Standards

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Advertising