ATTO Technology 2500C - Manual (Page 65)

56
CLI
iSCSITargetNameDisplay
Displays the iSCSI target name. If Multiple Target mode
is enabled, iSCSI target names are listed for all existing
iSCSI targets.
Immediate command: iSCSITargetNameDisplay
iSNSLoginControl
Specifies whether the iPBridge delegates its access
control/authorization to an iSNS server.
Default: disabled
Set syntax: set iSNSLoginControl [enabled | disabled]
Requires a SaveConfiguration command
Get syntax: get iSNSLoginControl
iSNSServer
Specifies whether the IP address of a valid iSNS server
from which the iPBridge attempts iSCSI initiator
discovery. Setting to 0.0.0.0 disables iSNS server lookup.
Default: 0.0.0.0
Set syntax: set iSNSServer [xxx.xxx.xxx.xxx]
Requires a SaveConfiguration command
Get syntax: get iSNSServer
MultiTargetMode
Enables/disables iSCSI multiple target mode addressing
on the iPBridge. If enabled, all previous maps are
deleted. In verbose mode, overwriting a map requires
secondary confirmation of the action.
Set syntax: set MultiTargetMode [enabled | disabled]
Get syntax: get MultiTargetMode