American Dryer Non-Tilting Phase 5 ML-200 - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/DIMENSIONS and
COMPONENT IDENTIFICATION
A. SPECIFICATIONS (GAS and STEAM Models)
IMPORTANT: Gas dryers and steam dryers must be provided with a clean, dry, regulated 80PSI
+/-10 PSI (5.51 bars +/- 0.68 bars) air supply.
NOTE: ADC RESERVES THE RIGHT TO MAKE CHANGES IN SPECIFICATIONS AT
ANY TIME, WITHOUT NOTICE or OBLIGATION.
Gas
Steam
Maximum Capacity (D
RY
W
EIGHT
) 200 lbs. 90.9 kg
Tumbler (B
ASKET
) Diameter 62-1/2" 158.75 cm
Tumbler (B
ASKET
) Depth 42" 106.7 cm
Tumbler (B
ASKET
) Motor 3 HP 2.24 kw
Door Opening (D
IAMETER
) 36-3/4" w x 43" h 93.35 cm x 109.2 cm
Door Sill Height 36-1/2" 92.71 cm
Tumbler (B
ASKET
) Volume 74.5 cu. ft. 2.11 cu. m.
Voltage Available 208-600v / 3Ø / 3, 4w 50/60 Hz
Heat Input 750,000 btu/hr 189,000 kcal/hr
Blower Motor 7-1/2 HP 5.6 kw
Approx. Weight (U
NCRATED
) 3,369 1,528.2 kg
Airflow 5,300 cfm 150.16 cmm
Inlet Size 1-1/4" 3.18 cm
Voltage Available 208-600v / 3Ø / 3, 4w 50/60 Hz
Blower Motor 15 HP 11.2 kw
Approx. Weight (C
RATED
) 3,719 lbs. 1,687 kg
Heat Input 27 Bhp
Steam Consumption 890 lbs./hr 404.5 kg/hr
Airflow 6,500 cfm 184.16 cmm
Inlet Size 2" 5.08 cm
Operating Steam Pressure 125 PSI max 8.79 kg/sq cm
Compressed Air Connection 1/8" F.P.T. ---
Shaded areas are stated in metric equivalents