Table 9-1. tl1 account privileges -2, Table 9-1 – ADTRAN MX2800 M13 User Manual
Page 126
9-2
61200290L1-1G
Section 9, Transaction Language 1 (TL1)
MX2800 M13 Multiplexer User Manual
To bring up a TL1 Telnet connection (up to eight may be active), a Telnet client requests a connection on
TCP port 3116 (port 2024 is used for “RAW TCP” socket access). Once the Telnet connection is estab-
lished, it is necessary to initiate a TL1 session. Establishing a TL1 session involves successful user authen-
tication. Until a TL1 session is established, all commands other than those used to initiate or terminate a
session are denied. Autonomous messaging is also disabled. For information on using the Act-User
command to initiate a TL1 session, refer to
NOTE
If RADIUS authentication is enabled, refer to
page 3-27, the MX2800 attempts to use RADIUS to authenticate TL1
Table 9-1. TL1 Account Privileges
TL1 Command
Guest
Interface
Test
Admin
ACT-USER
X
X
X
X
ALW-MSG-rr
X
X
X
X
CANC-USER
X
X
X
X
DLT-USER-SECU
X
ED-USER-SECU
X
ED-rr (related to loopbacks)
X
X
ED-rr (configuring alarm relays)
X
ED-rr (all remaining)
X
X
X
ENT-USER-SECU
X
INH-MSG-rr
X
X
X
X
OPR-LPBK
X
X
REPT-STAT
X
X
X
X
RLS-LPBK
X
X
RTRV-ALM-rr
X
X
X
X
RTRV-COND-rr
X
X
X
X
RTRV-HDR
X
X
X
X
RTRV-rr
X
X
X
X
RTRV-SYS
X
X
X
X
RTRV-USER-SECU
X
RTRV-VER
X
X
X
X
SET-DAT
X