Next Advance SP1070-M - Manual (Page 32)

NEXT>>>ADVANCE www.nextadvance.com
SP1000 series operator’s manual
Manual SP1000 series 25
9.3.18 'OUt.n': Set TTL Output Pin
n
Set ‘Program Output’ TTL I/O output (pin 5) to level ‘n’. If ‘n’ = 0, the output pin will be set
low. If ‘n’ = 1, the output pin will be set high.
9.3.19 'bEEP': Beep
Sounds a short beep.
9.4 Pumping Program Examples
9.4.1 Example 1: 2 Step Rate
ml Dispensed
0 5 30
0
2.5
500
m
l/
h
r
R
a
te
Infuse 5.0 ml at 500 ml/hr, and then infuse 25.0 ml at 2.5 ml/hr. Then stop the pump.
Phase Function Rate Volume Direction
1 RATE 500 ml/hr 5.0 ml Infuse
Phase Function Rate Volume Direction
2 RATE 2.5 ml/hr 25.0 ml Infuse
Phase Function
3 STOP
9.4.2 Example 2: Repeated Dispenses with Suck Back
m
l/
h
r
R
at
e
Time