Revolabs Solo Executive Operation Manual - Manual (Page 10)

- 7 -
Using the Revolabs Solo™ Executive Base Station
The Revolabs Solo™ Executive Base Station, shown below in front and rear
panel views, manages wireless audio signal processing, pairing, and muting
between the Revolabs microphones and the Base Station.
The Base Station includes the features and controls listed 1-14 on the following
page (8 channel system shown numbered in the figure, above):
1. Channel LED indicators: Displays
microphone and pairing states.
8. Mini-Phoenix Connectors: Audio in and out
connections (4 or 8 channels in and out).
2. Diversity Antennae: One or two sets (4
channel or 8 channel).
9. Learn Button and Signal LED: For linking
Charger Base System Mute to Base Station.
3. Pairing Push Buttons: For pairing
microphones to Base Station.
10. Local/Remote selector switch for Multiple
Base Station synchronization.
4. Muting Antenna. 11. USB and Ethernet Ports (Future use).
5. Power On LED. 12. Mini-Phoenix Connector: Multiple Base
Station (BUS) synchronization connection.
6. On/Off Switch: Powers up unit. 13. System Mute function switch.
7. Power In Receptacle (AC In). 14. DB25 Control Port (Parallel IO Port).