Revolabs Solo Executive Operation Manual - Manual (Page 16)

- 13 -
• Solo Tabletop Wireless Boundary Microphone.
• Solo Universal Wireless Adapter for Handheld Microphones.
Using Revolabs Solo™ Wearable Wireless Microphones
The Revolabs Solo™ Wearable Microphones, shown in the following figure, are
paired to the Base Station and can be worn on the user’s shirt pocket, lapel or
on a lanyard. They provide high quality full duplex audio between each user
and the conferencing or audio system.
1. Microphone port — direct port toward mouth for best audio pickup.
2. Noise cancelling port — do not block opening.
3. Mute Button — press to mute, un-mute and pair microphone.
4. Pocket clip — also used to attach microphone to lanyard.
5. LED display — visual status for mute, un-mute, and pairing.
6. Earpiece jack — accepts the 2.5mm plug for the earpiece.
7. Charging port — docks to Solo Charger Bases.
Note: Microphones in new systems must be paired to the Base Station with
each microphone assigned to a unique channel on the base unit. See pairing
instructions below.
Revolabs Solo™ Wearable Microphones turn on and mute automatically when
removed from Charger Base, to reduce noise while being attached. The
microphone has a clip on the back which allows the microphone to be easily
attached onto a shirt pocket, blouse, lapel or lanyard.
To use the Wearable Mic:
1. Remove the microphone from the Charger Base.
2. Attach the microphone to clothing or to a lanyard close to the mouth, within
6 - 12 inches (15 – 30cm) is recommended. Make sure microphone is
attached securely with the microphone port pointed up toward mouth.