Lenovo ThinkServer RD440 User Manual
Page 162
Advertising
5. Position the 2.5-inch solid-state drive to the 3.5-inch to 2.5-inch drive adapter as shown in the following
illustration.
Figure 102. Positioning the 2.5-inch solid-state drive to the drive adapter
6. Align the two screw holes in the solid-state drive with the corresponding holes in the drive adapter.
Then, install the two screws to secure the solid-state drive to the drive adapter.
Figure 103. Installing the screws to secure the solid-state drive to the drive adapter
7. Position the drive adapter with the solid-state drive into the 3.5-inch drive bracket.
150
ThinkServer RD440 User Guide and Hardware Maintenance Manual
Advertising