Lenovo ThinkServer RD440 User Manual
Page 57
Backplane for server models with twelve 3.5-inch hard-disk-drive bays
This topic provides information to help you locate the connectors on the backplane for server models with
twelve 3.5-inch hard-disk-drive bays.
The following illustrations show the connectors on the backplane for server models with twelve 3.5-inch
hard-disk-drive bays.
Figure 31. Front view of the backplane for server models with twelve 3.5-inch hard-disk-drive bays
1
Slot 0 for a 3.5-inch hard disk drive
7
Slot 6 for a 3.5-inch hard disk drive
2
Slot 1 for a 3.5-inch hard disk drive
8
Slot 7 for a 3.5-inch hard disk drive
3
Slot 2 for a 3.5-inch hard disk drive
9
Slot 8 for a 3.5-inch hard disk drive
4
Slot 3 for a 3.5-inch hard disk drive
10
Slot 9 for a 3.5-inch hard disk drive
5
Slot 4 for a 3.5-inch hard disk drive
11
Slot 10 for a 3.5-inch hard disk drive
6
Slot 5 for a 3.5-inch hard disk drive
12
Slot 11 for a 3.5-inch hard disk drive
Figure 32. Rear view of the backplane for server models with twelve 3.5-inch hard-disk-drive bays
1
Signal cable connector
5
Signal cable connector
2
Mini-SAS ports 8-11
6
8-pin power connector
3
Mini-SAS ports 4-7
7
8-pin power connector
4
Mini-SAS ports 0-3
1
Signal cable connector
Used to connect the signal cable for the front controls and LEDs on the right rack handle.
2
Mini-SAS ports 8-11
Used to connect the mini-SAS connector on one end of a mini-SAS to mini-SAS signal cable to support the
hard disk drive 8 to hard disk drive 11.
45