Lenovo ThinkServer RD440 - Manual (Page 66)

10 Platform Controller Hub (PCH)
This chip supports and provides many features. It serves as a PCH, which provides the data buffering and
interface arbitration required to ensure that system interfaces operate efficiently and provides the bandwidth
necessary for the system to achieve peak performance.
11 Internal USB Type A connector 2
13 Internal USB Type A connector 1
Used to connect a device that uses a USB Type A connector. For example, in some situations, you might
want to connect a USB key directly to the system board. In this case, you can connect it to an internal
USB Type A connector.
12 TMM Premium connector
Used to connect a server option named as ThinkServer Management Module Premium (TMM Premium) to
enable advanced remote management functions on your server. See “Installing or removing the ThinkServer
Management Module Premium” on page 127.
14 TPM connector
Used to connect a TPM, which is a security chip, to enhance server security. See “Installing or removing the
ThinkServer Trusted Platform Module” on page 130.
15 iButton socket
Your server supports ThinkServer RAID 300, which includes onboard SAS software RAID levels 0, 1, and 10.
You also can activate onboard SAS software RAID 5 by installing a ThinkServer RAID 300 Upgrade Key for
Advanced RAID in the iButton socket. For more information, see “Installing or removing the ThinkServer
RAID 300 Upgrade Key for Advanced RAID” on page 123.
16 ThinkServer Management Module
With the integrated ThinkServer Management Module (also known as the BMC chip), no matter what
condition the server operating system is in and no matter if the server is on or off, as long as the server
is connected to network and an ac power source, the interaction with the TMM controlled servers can be
achieved through system network. The user can obtain the server hardware health information and SEL,
and is able to conduct the operations including turning on or off the server, restarting the server, and so
on. This part of the server management is independent of the operating system and is called out-of-band
management.
17 Riser card assembly 1 slot
Used to install the riser card assembly 1.
18 Riser card assembly 2 slot
Used to install the riser card assembly 2.
19 Redundant power supply connector 1
20 Redundant power supply connector 2
Used to connect a hot-swap redundant power supply.
54 ThinkServer RD440 User Guide and Hardware Maintenance Manual