Lenovo ThinkServer TS440 - Manual (Page 120)

• Use any documentation that comes with the solid-state drive and follow those instructions in addition to
the instructions in this topic.
Installing a 2.5-inch solid-state drive into a 3.5-inch hard-disk-drive bay
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 65.
This topic provides instructions on how to install a 2.5-inch solid-state drive into a 3.5-inch hard-disk-drive
bay.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Ensure that you have a 3.5-inch to 2.5-inch drive adapter and a 3.5-inch drive bracket available
before the installation.
To install a 2.5-inch solid-state drive into a 3.5-inch hard-disk-drive bay, do the following:
1. Use the front door key to unlock the front door, and then use the front door handle 1 to pivot the
front door to the open position.
1
Figure 62. Opening the front door of the server
2. Locate the appropriate hard-disk-drive bay. See “Server components” on page 23.
108 ThinkServer TS440 User Guide