Lenovo ThinkServer TS440 - Manual (Page 94)

7. Remove the screw that secures the Ethernet card. Then, grasp the Ethernet card by its edges and
carefully pull it out of the PCI Express card slot.
Note: The Ethernet card fits tightly into the PCI Express card slot. If necessary, alternate moving each
side of the Ethernet card a small and equal amount until it is completely removed from the slot.
Figure 40. Removing the Ethernet card
8. Install a new Ethernet card to replace the old one or install a PCI Express card slot bracket to cover the
place. See “Installing the Ethernet card” on page 78.
9. Install the PCI card bracket assembly if a RAID card is installed in your server. See “Removing and
reinstalling the PCI card bracket assembly” on page 71.
10. If you are instructed to return the old Ethernet card, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 157.
Installing or removing the RAID card
This topic provides instructions on how to install or remove the RAID card.
A specific RAID card is required for server models with more than four SATA hard disk drives or models
that use SAS hard disk drives. You also can purchase a supported RAID card from Lenovo and install it
into the server for advanced SATA/SAS hardware RAID functions. For more information, see “RAID card”
on page 29 and “Configuring RAID” on page 57.
Note: The RAID card is sensitive to ESD. Ensure that you read and understand “Handling static-sensitive
devices” on page 66 first and carefully perform the operation.
82 ThinkServer TS440 User Guide