Lenovo S310 All-in-One - Manual (Page 127)

Figure 52. Removing the WI-FI card
9. Insert the notched end of the new WI-FI card into the mini PCI Express slot. Press the new WI-FI
card firmly, and then pivot the WI-FI card to align the screw hole in the new WI-FI card with that
in the system board.
10. Install the screw to secure the new WI-FI card to the system board.
11. Connect the two cables to the new WI-FI card.
12. Reinstall the rear I/O assembly. See “Replacing the rear I/O assembly” on page 94.
13. Reinstall the system board shield. See “Removing and reinstalling the system board shield” on page 96.
14. Go to “Completing the parts replacement” on page 121.
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover
and reconnect cables.
To reinstall the computer cover and reconnect cables, do the following:
1. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside your computer. See “FRU locations” on page 80 for the locations of various components in
your computer.
2. Make sure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear
of the hinges and sides of the computer chassis to avoid interference with reinstalling the computer
cover.
Chapter 8 . Replacing FRUs 121