Lenovo S310 All-in-One User Manual

Page 76

Advertising
background image

Diagnostic Error Code

FRU/Action

089-197-XXX Microprocessor test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Re-run test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

089-198-XXX Microprocessor test aborted

1. Flash the system. See “Flash update procedures”

on page 127.

2. Go to “Undetermined problems” on page 76.

089-199-XXX Microprocessor test failed, cause unknown

1. See “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

170-000-XXX Voltage Sensor(s) Test Passed

No action

170-0XX-XXX Voltage Sensor(s) failure

1. Flash system

2. System board

170-195-XXX Voltage Sensor(s) Test aborted by user

Information only Restart the test, if necessary.

170-196-XXX Voltage Sensor(s) test halt, error threshold
exceeded

1. Press F3 to review the log file.

2. Restart the test to reset the log file.

170-197-XXX Voltage Sensor(s) test warning

1. Make sure the component that is called out is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Re-run test.

3. Replace the component that is called out in warning

statement.

4. Replace the component under test.

170-198-XXX Voltage Sensor(s) test aborted

1. If a component is called out, make sure it is

connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 51.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Go to “Undetermined problems” on page 76.

170-199-XXX Voltage Sensor(s) test failed, cause unknown

1. See “Undetermined problems” on page 76.

2. Flash the system and re-test. See “Flash update

procedures” on page 127.

3. Replace component under function test.

170-250-XXX 170-251-XXX Voltage Sensor(s) Voltage
limit error

1. Power supply

2. System board

170-254-XXX Voltage Sensor(s) Voltage Regulator Module
error

1. Voltage Regulator Module (VRM)

2. Microprocessor

3. System board

175-000-XXX Thermal Sensor(s) Test Passed

No action

175-0XX-XXX Thermal Sensor(s) failure

1. Flash system

2. System board

70

Lenovo S310 All-In-OneHardware Maintenance Manual

Advertising