Lenovo S310 All-in-One - Manual (Page 85)

Using your computer in monitor mode
Your computer can work in two modes: computer mode or monitor mode. This section provides instructions
on how to use your computer in monitor mode.
To use your computer in monitor mode, you need to have a second computer. Connect one end of the
VGA cable to the VGA-in connector on the rear of your computer, and connect the other end to the VGA
connector on the second computer. Turn on your computer, and then press the VGA-in control on the front
of the computer to use the computer in monitor mode. Press the brightness-up / Auto-adjusting control
button, and the screen is automatically optimized.
Note: To return to the computer mode, press the VGA-in control on the front of the computer to return
to the computer mode.
Locating connectors on the rear of your computer
Figure 2 “Rear connector locations” on page 79 shows the locations of the connectors on the rear of your
computer. Some connectors on the rear of your computer are color-coded to help you determine where to
connect the cables to your computer.
Figure 2. Rear connector locations
1 Optical drive 5 Ethernet connector
2 Integrated cable lock slot 6 VGA-in connector
3 USB connectors (4) 7 HDMI-out connector
4 Power cord connector 8 System stand
Chapter 8 . Replacing FRUs 79