Removing and reinstalling the system stand – Lenovo S310 All-in-One User Manual
Page 90
6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the two plastic tabs
1
on the hinge cover align with the corresponding holes in the computer.
Figure 6. Reinstalling the system stand hinge cover
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 7. Reinstalling the screw to secure the system stand hinge cover to the computer
Removing and reinstalling the system stand
Attention
Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the
Safety, Warranty, and Setup Guide, go to:
84
Lenovo S310 All-In-OneHardware Maintenance Manual