Operations commands, Operations commands 20, Operations – American Power Conversion AmpMeter PDU User Manual
Page 20
3. Operations
Operations Commands
Operations commands provide information about the AmpMeter PDU environment and control session
operations.
Displaying accessible serial ports
The List Ports command displays accessible serial ports for the current user.
To display accessible serial ports:
At the AmpMeter PDU: prompt, type
list ports
and press
Enter
.
Example
The follow command displays all accessible serial ports for the current user:
AmpMeter PDU: list ports<Enter>
Port Port
ID Name
Console Console
Displaying infeed status
The Istat or Iload command displays the status of one or more infeed.
This display includes the infeed absolute and descriptive names and the Input Status and current Load reported
to the AmpMeter PDU by the infeed.
To display status of one or more infeeds:
Type
istat
and press
Enter
, or
Type
iload
and press
Enter
.
Examples
The following command displays the infeed status:
AmpMeter PDU: istat
Input Input Input Input
Feed ID Feed Name Status Load
.AA HQ_1_Infeed_A On 10.5 Amps
Connecting to a serial device
The Connect command allows Pass through serial connection to devices attached to the standard serial port
(Console).
To connect to a serial device:
At the AmpMeter PDU: prompt, type
connect
console
and press
Enter
.
To disconnect from a serial device:
Type:
!*break
and press
Enter
.
Page 20 - 301-0399-3 Rev A.