AMX Signature Series NetLinx Integrated Controller NI-3101-SIG - Manual (Page 66)

NetLinx Security within the Web Server
56 NI-3101-SIG Signature Series NetLinx Integrated Controller
5. Select either the Control or Emulate option.
 To Control a device means that the program generates messages which appear to a specified device
to have come from the Master. The options in this frame specify the <D:P:S> combination for the
device to be controlled.
 To Emulate a device means that the program generates messages which appear to the Master to
have come from a specified <D:P:S> combination (real or fictitious). The options in this frame
specify the <D:P:S> combination for the device to be emulated.

Selecting this option adds a Push button with the Channel Code section of this page.
6. Enter a System Number, Device Number, and Port Number into the appropriate fields. These values
correspond to the device to be controlled, whether real or fictitious.
 The Device, Port, and System value ranges are 1 - 65535.
7. Within the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/
Release, CHON, and CHOFF) for the specified <D:P:S>.
 The Channel number range is 1 - 65535.
8. Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for
the specified <D:P:S>.
9. Select the Push button to Emulate a push/release on the channel specified. You can click and hold down
the Push button to see how the device/Master responds to the push message.
10. Within the Level Code section, enter a valid Level number and Level data value for the specified
<D:P:S> and press the Send button to transmit this data.
 The Level number range is 1 - 65535.
 The list below contains the valid Level data types and their ranges:
FIG. 47 Control/Emulate dialog