AMX Signature Series NetLinx Integrated Controller NI-3101-SIG - Manual (Page 68)

NetLinx Security within the Web Server
58 NI-3101-SIG Signature Series NetLinx Integrated Controller
Setting up and removing a Diagnostic Filter
1. Setup a diagnostic filter by scrolling down the page and clicking the Modify button below the first empty
column. This action opens the Device Configuration dialog as a secondary popup window.
2. Configure a diagnostic filter using the parameters available within the Diagnostic Configuration dialog.
 The Diagnostic Configuration dialog allows you to select both the notifications you wish to
receive and the target devices (within the Online Tree) for these notifications. Several different
types of asynchronous notifications can be selected for a device:port:system (D:P:S) combination.
Each notification type is represented by a column in the table. All messages are displayed in the
Notifications tab of the Output Display window within NetLinx Studio v 2.4.
3. A user can choose to either store these selections to a profile or recall a previously stored profile
configuration by either:
 Select an open Preset number entry from within Presets drop-down list. Make all desired
notification selection and press the Store button. Pressing this button opens a popup field labeled
Explorer User Prompt - Preset Name?
, intended for entering the name associated with this new
Preset.

Press OK to return to the previous Device Configuration popup dialog.

Click Cancel to exit this popup and return to the previous dialog box without making any
changes.
FIG. 48 Diagnostics dialog (showing modify popup)
Device Configuration
dialog
NetLinx
Notification
types
Selected device
Up to 8 concurrent diagnostic filter slots can be simultaneously active using any
eight of the 10 available user-configurable Presets available through the Device
Configuration dialog.