AMX Signature Series NetLinx Integrated Controller NI-3101-SIG - Manual (Page 69)

NetLinx Security within the Web Server
59 NI-3101-SIG Signature Series NetLinx Integrated Controller
 Press the down arrow (adjacent to the Preset drop-down list) to display a listing of all currently
available Presets. Select a previously configured Preset and press the Recall button to populate all
available fields and radio buttons with the selections associated with this chosen Preset.

This preset mechanism is done via cookies so it does not persist across multiple browsers/
computers.
4. Once all modifications/selections within this dialog have been made, press the Update button to save the
changes and return to the Diagnostics dialog.
Diagnostic Configuration Dialog
Feature Description
Update: Click this button once you have completed setting up your filter. The popup
then closes and returns you to the Diagnostics window.
• Watch the bottom Incoming Message pane for messages to begin coming in
from the target device(s).
Remove: Click this button to remove a selected Preset from being available within the
Presets drop-down list.
Presets: This list of up to 10 presets comes defaulted with Preset 0: All Devices, All
Notifications
• Store: Save the current notification selections to a Preset profile. Pressing
this button opens a popup field labeled Explorer User Prompt - Preset
Name? where you enter the name associated with this new Preset.
- Click OK to save both the Preset parameters and name, and then return
to the Diagnostic Configuration Dialog.
- Click Cancel to exit this popup and return to the previous dialog without
making any changes.
• Recall: Allows a user to recall a previously existing Preset. This action then
populates every field and radio button with the selections associated with the
chosen Preset.
- This preset mechanism is done via cookies so that it does not persist
across multiple browsers/computers.
Note: A Preset MUST be Recalled before clicking the Update button.
If you do not press this button, none of the fields or checkboxes are
modified or selected. In essence, all options become disabled.
Note: The All Devices entry cannot be removed.
Note: The only way to modify the information within a Diagnostic filter is to
remove the assigned Preset, change the information, and assign a new Pre-
set. Refer to step 5 of this section for more information.
System/Device/Port: Device, Port, System: Use these fields to enter a device:port:system (D:P:S)
combination for the device that you want to enable notifications for.
• The specified device then appear in the Device field within the Diagnostic
Configuration Dialog.
• A value of 0 for any option gives you all of the systems, devices, or ports.
This dialog also allows you to store/recall presets.