Xerox WorkCentre M24-2780 - Manual (Page 102)

1–60
U S E R G U I D E (C O P I E R )
Multiple Up
The Multiple Up feature enables you to copy 2 or 4 images from
multiple originals onto a single page.
NOTE: When using this feature place the originals in the DADF.
NOTE: Depending on the size of the original, some image loss
might occur along the edge of the image.
The following options are available:
1 Up Copies one image on each output copy.
2 Up Copies two images on each output copy.
4 Up Copies four images on each output copy.
NOTE: This feature is not available with a platen only
configuration.