Xerox WorkCentre M24-2780 - Manual (Page 411)

5–5
U S E R G U I D E (T R O U B L E S H O O T I N G )
Paper Jams in Trays 1 to 4
This section describes how to clear paper jams that occur in Trays
1 to 4.
1
Open the tray where the paper jam occurred.
2
Remove the jammed paper.
3
Push the tray in gently until it comes to a stop.
Paper Jams in Tray 5 (Bypass)
This section describes how to clear paper jams that occur in Tray
5 (Bypass).
1
Inspect the paper feed entrance of Tray 5 (Bypass), and remove
any jammed paper.
NOTE: When two or more sheets of paper are loaded, remove all
of the sheets from the tray.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
2
Fan the paper you removed making sure that all four corners are
neatly aligned.
3
Insert the paper into the Tray with the printed side facing down
until its lead edge lightly touches the paper feed entrance.