Xerox WorkCentre M24-2780 - Manual (Page 379)

4–45
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Receiving Buffer-LPD
Spool
Choose from the following options:
• Off - Spooling is not performed.
While the machine is processing or printing LPD data from a
client, it cannot receive other data from other clients through
the same interface. The LPD reception buffer can be set
between 64 ~ 1024 KB, in increments of 32 KB. The default is
256 KB.
• Memory - Spooling is performed.
Memory is used as the reception buffer for the spooling
process. The size of the reception buffer for the spooling
process can be set between 512 KB ~ 32.00 MB, in
increments of 0.25 MB. The default is 1.00 MB.
NOTE: Printing data bigger than the memory size set here cannot
be received. If this happens, select Hard Disk Spooling or
Spooling Off.
• Hard Disk - Spooling is performed.
Hard drive is used as the reception buffer for the spooling
process.
The default is Off.
Receiving Buffer-NetWare Set the reception buffer for NetWare.
The memory size can be set between 64 ~ 1024 KB, in increments
of 32 KB. The default is 256 KB.