Resolving hardware problems, Toner cartridge, Resolving hardware problems 5-11 – Xerox WorkCentre M24-2780 User Manual

Page 417: Toner cartridge 5-11, Resolving hardware problems 11, Toner cartridge 11

Advertising
background image

5–11

U

S E R

G

U I D E

(T

R O U B L E S H O O T I N G

)

Resolving Hardware Problems

Toner Cartridge

NOTE:

Inform the Xerox service representative at the next service

call about the above action since he or she may need to clean up
the dry ink on internal printer/copier components.

Problem

Suggested Solutions

– Operator mistakenly

removed the wrong
toner cartridge and
wishes to reinsert it.

– Operator cannot

reinstate a partially full
toner cartridge after it
has been removed.

– Reinstall the toner cartridge using the following procedure:

NOTE:

The following procedure may result in dry ink spillage on

the floor. To protect the floor, put a disposable covering or drop
cloth beneath and in front of the printer/copier.

– Reinstall the used and partially full toner cartridge by

pushing in the cartridge until it is fully seated against the
rear stop.

Advertising