Xerox WorkCentre M24-2780 - Manual (Page 382)

4–48
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Scan Mode Settings
These settings are enabled for the scan features.
For more information on scanner features, refer to the User Guide
(Scan).
Basic Scanning Presets
You can change the magnification percentages assigned to the
buttons displayed in R/E Presets on the Basic Scanning screen.
Setting frequently used scan ratios prevents you from having to
change the setting each time you scan.
The following items can be configured in R/E Presets.
Reduce/Enlarge Presets
2nd ~ 4th Buttons
Set the ratios displayed for the 2nd to 4th buttons from the top
down, for each of the feature buttons. Select available ratios from
those currently assigned to R/E Preset buttons.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The defaults are: 2 for the 2nd button from
the top, 4 for the 3rd button, and 7 for the 4th button.
NOTE: This setting is not used when there is a DADF on the
machine.
Setting Description
1 Ratio set to R/E Preset 1
2 Ratio set to R/E Preset 2
3 Ratio set to R/E Preset 3
4 Ratio set to R/E Preset 4
5 Ratio set to R/E Preset 5
6 Ratio set to R/E Preset 6
7 Ratio set to R/E Preset 7