Xerox WorkCentre M24-2780 - Manual (Page 350)

4–16
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
Image Quality Different image quality settings can be selected for Bond Paper,
Plain Paper, Recycled Paper, and Custom Paper 1 to 5.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table.
NOTE: 16 and 64 are valid numerical values when printing from
the printer. When making copies using these settings, the result
will be the same as 8 and 32 respectively.
NOTE: Poor-texture paper refers to paper whose surface is
uneven when viewed against a strong light.
Setting Description
1 Best suited for color-exclusive bond
paper
2 Best suited for paper used in office
environments
4 Best suited for recycled paper
8 Select if small white spots or streaks
appear when printing on Plain paper
only
16 Select if small white spots or streaks
appear when printing on Plain paper
only
32 Select if small white spots or streaks
appear when printing on Plain paper
only
64 Select if small white spots or streaks
appear when printing on Plain paper
only
128 Your Xerox Customer Support Center
will set this if you are printing on
paper that does not fall under any of
the above categories. Use this setting
to improve gloss on 28 lb. Bond
paper.