Xerox WorkCentre M24-2780 - Manual (Page 90)

1–48
U S E R G U I D E (C O P I E R )
Border Erase
The Border Erase feature enables you to eliminate unwanted
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase options can be used individually or combined
together:
Top & Bottom For Normal the default is 2mm. For Variable Erase the default is
5mm.
Left & Right For Normal the default is 2mm. For Variable Erase the default is
5mm.
Center The default is 0mm.
The selected settings are applied to both sides of 2-sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the Border Erase. For example, if Variable Erase
is set to 30mm, a 50% reduction will result in 15mm of border
erase on the output.
When making copies the copier adds a margin of 2mm to all sides.
This cannot be eliminated.