Xerox WorkCentre M24-2780 - Manual (Page 177)

2–13
U S E R G U I D E (P R I N T )
Settings
Output Tray Specify whether Finisher is installed and the type.
Paper Detect by Tray Specify either Statement Paper Detection, or A5 Paper Detection.
Output Settings Tab Settings
This section describes the settings in the Output Settings tab.
• You can restore defaults by selecting the Restore
Defaults button.
Output Paper
Output Size Select the size of the paper used for output. The output is
automatically enlarged or reduced, depending on the paper size
selected in the Output Size and the paper size selected in the
Paper tab.
Example: When you select 8 1/2 x 11 inches in Paper size
in the Paper tab and 11 x 17 inches is selected in the
Output Size, the output is automatically enlarged and
printed.
When None is selected the job is printed based on the paper size
selected in the application.