Xerox WorkCentre M24-2780 - Manual (Page 198)

2–34
U S E R G U I D E (P R I N T )
Output Settings Tab Settings
This section describes the settings in the Output Settings tab.
Job Type
Job Type You can specify the print function from among Secure Print,
Sample Print, and Delayed Print.
Secure Print: A function that temporarily stores print jobs in the
printer, and prints the job when instructed from the printer control
panel.
• If you want to output secure prints, set the User ID and
password for Print Type in the Configuration tab.
Sample Print: A function that outputs only 1 set when multiple
sets are specified. If the job is as specified, the remaining sets are
printed.
Delayed Print: A function that temporarily stores print jobs in the
printer, and prints them at a scheduled time.
Normal Print Select when you do not want to output secure prints, sample
prints, or delayed prints.
Secure Print Select when you want to output secure prints.
Sample Print Select when you want to output sample prints.
NOTE: The Collated setting must be selected in the Page Setup
tab when using Job Type.
Delayed Print Select when you want to output delayed prints.
User ID Displays the User ID for Job Type. The User ID displayed is the
User ID specified on the Configuration tab. This option can only be
selected when the setting on the Configuration tab has been
completed. This is a display-only item and cannot be changed in
User ID.