Xerox WorkCentre M24-2780 - Manual (Page 363)

4–29
U S E R G U I D E (M A C H I N E A D M I N I S T R A T O R )
2 Sided This sets up the default for 2 Sided on the Basic Copying and
Added Features screens.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, 1 to 1.
Output This sets up the default for Output on the Added Features screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Auto.
Output Destination This sets up the Output Tray for copy and print jobs.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Center Output Tray.
NOTE: The Optional Finisher must be installed to use the Finisher
Tray.
Setting Description
0 1 to 1 Sided
1 1 to 2 Sided
2 2 to 1 Sided
3 2 to 2 Sided
Setting Description
0 Auto
1 Collated
2 Uncollated
Setting Description
0 Center Output Tray
2 Finisher Tray