Xerox WorkCentre M24-2780 - Manual (Page 310)

3–20
U S E R G U I D E (S C A N )
Border Erase
The Border Erase feature enables you to eliminate unwanted
marks near the edges of the original from the output copy. The
range for Border Erase is 0 through 50 mm in 1mm increments.
Border Erase offers the following options which can be used
individually or combined together:
Top & Bottom The default is 5mm.
Left & Right The default is 5mm.
Center (Gutter) The default is 5mm.
The selected settings are applied to both Side 1 and Side 2 of 2-
sided copies.
When the image is reduced or enlarged, the selected percentage
will be applied to the border erase.
When scanning, the machine adds a margin of 2mm to all sides.
This cannot be eliminated.