Axis Communications 5600 - Manual (Page 10)

Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
AXIS 5600 User’s Manual Section 1: Introduction 9
How to use it
Installation and
Integration
The installation of the AXIS 5600 and its integration into the network
is performed using the appropriate Axis client software, provided with
your print server:
• AXIS NetPilot™ (NetWare - IPX)
• AXIS Print System (Windows 95/98, NT4.0 and 2000)
• AXIS Print Monitor (Windows NT 3.5x)
• AXIS Print Utility for Windows (Windows 3.1 and WfW)
• AXIS Print Utility for OS/2
• axinstall (UNIX)
Notes: ❏ The AXIS 5600 can be installed in the Macintosh environment
without any Axis client software.
❏ The AXIS 5600 can be installed in NetWare - Pure IP
environments with NetWare Administrator.
Configuration and
Management
As the AXIS 5600 comprises a built-in Web server, it can be
configured and managed directly from its internal Web pages, using
HTTP over TCP/IP. Access to the AXIS 5600 via any javascript-
enabled Web browser, offers you a platform-independent
management tool that is suitable for all supported network
environments.
In TCP/IP networks you can also use AXIS ThinWizard, which
provides you with remote management capabilities for your AXIS
ThinServer devices.
If your network does not support TCP/IP, you can use AXIS NetPilot
to configure and manage the AXIS 5600. AXIS NetPilot supports
communication via IPX/SPX and NetBIOS/NetBEUI.