Axis Communications 5600 - Manual (Page 123)

Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 9: Management & Configuration AXIS 5600 User’s Manual 122
Viewing
the Status file
The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5600 by typing:
telnet <host name> or telnet <IP address> in a DOS
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are root
and pass .)
3. View the status file by typing:
status
Performing resets Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server’s parameters to its
factory default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5600 by typing:
telnet <host name>
or
telnet <IP address>
in a DOS
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
root
and pass .)
3. Restart the print server’s protocols by typing:
softreset
Replace the command in step 3 above with hardreset or default to
perform the other two reset operations.
Telnet Help By typing help in step 3 in any of the Telnet instruction sets above, a
list of all available commands will be displayed.