Axis Communications 5600 - Manual (Page 91)

UNIX
Section 8: Setting Up - UNIX AXIS 5600 User’s Manual 90
Character Set
Conversion
A common problem in a multiple host environment is that different
hosts use different ASCII character sets. As a result of this, language
specific characters (such as е ь ф с) are sometimes printed incorrectly.
The AXIS 5600 solution to this problem is to assign a character set
conversion filter to a logical printer, and then link that logical printer
to the host causing the problem.
You select your desired conversion filter by setting the Character Set
Conversion (PRx_CSET) parameter. The output from the conversion
filter is always IBM PC Set 2 (Code Page 437), and this is the
character set the printer must be set up for.
Example: Your network contains a host using the character set ISO 8859-2 and
a host using the character set DEC. In order to direct their print jobs
to the same printer, e.g. LPT1, you should assign each host to a
separate logical printer, and install a character set conversion filter.
Follow the instructions below to change the conversion filter:
1. Select the Printer1 Web page.
2. Set the parameter Physical Port to LPT1.
3. Set the parameter Character Set Conversion to ISO>IBM.
4. Click the Submit Printer1 settings button.
5. Select the Printer2 Web page.
6. Set the parameter Physical Port to LPT1.
7. Set the parameter Character Set Conversion to DEC>IBM.
8. Click the Submit Printer2 settings button.
The ISO 8859-2 printer data that is sent to logical printer PR1
converts to IBM PC Set 2 and is printed on LPT1. Similarly, the DEC
printer data that is sent to logical printer PR2 converts to IBM PC Set
2 and is printed on LPT1.