Axis Communications 5600 - Manual (Page 82)

Ma
ci
ntosh
AXIS 5600 User’s Manual Section 7: Setting Up - Macintosh 81
6. Write a text file containing the parameters you want to set:
Parameters that you do not want to set should be excluded from
the text file.
Refer to B - The Parameter List, on page 143, for information
about which values that are valid for each parameter.
7. Print the text file. The settings will be stored in the print server.
8. Open the Chooser and select the printer port you wish to use for
printing documents.
9. Close the Chooser.
Note: ❏ The _CFG port disappears 60 minutes after the AXIS 5600 has
been powered on. If you want it to reappear, you must restart
your AXIS 5600.
BINARY_TYPE_1. :BCP
INT_ADDR. :192.168.3.191
ATYPE_1. :EPSONLQ2