Axis Communications 5600 - Manual (Page 152)

Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
AXIS 5600 User’s Manual Appendix B: The Parameter List 151
--- LPT1 Menu
L1_CENTR. : HISPEED (IBM_PC, STNDRD, FAST, HISPEED) Centronics Interface Timing LPT1
L1_BSYTM. : 60 Busy Status Time-Out LPT1
(All status reporting disabled if set to 0)
L1_MGM_INFO. : AUTO (DISABLE, AUTO) Printer Management Information LPT1
L1_COMMENT. : Optional user comment describing the printer at LPT1
--- COM1 Menu
C1_BAUDR. : 9600 (300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, 115200)
Baud Rate COM1
C1_NBITS. : 8 (7, 8) Word Length COM1
C1_PARIT. : NONE (NONE, ODD, EVEN) Parity COM1
C1 STOPB. : 2 (1, 2) Stop Bits COM1
C1_HNDSH. : ROBUST-BOTH (NONE, XON/XOFF, ROBUST,
RDY/BSY, BOTH, ROBUST-BOTH)
Handshake Protocol COM1
C1_READT. : 3 Printer Feedback Delay COM1
C1_BSYTM. : 60 Busy Status Time-Out COM1
(All status reporting disabled if set to 0)
C1_MGM_INFO. : AUTO (DISABLE, AUTO) Printer Management Information COM1
C1_COMMENT. : Optional user comment describing the printer at COM1
--- LPT2 Menu
L2_CENTR. : HISPEED (IBM_PC, STNDRD, FAST HISPEED) Centronics Interface Timing LPT2
L2_BSYTM. : 60 Busy Status Time-Out LPT2
(All status reporting disabled if set to 0)
L2_MGM_INFO. : AUTO (DISABLE, AUTO) Printer Management Information LPT2
L2_COMMENT. : Optional user comment describing the printer at LPT2