Axis Communications 5600 User Manual
Page 31
Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 3: Basic Installation
AXIS 5600 User’s Manual
30
Using ARP in
Windows and OS/2
Follow the instructions below to set the IP address using ARP:
1. Start a DOS window.
2. Type the following commands:
Example
The host will return
Reply from 192.168.3.191 ...
or a
similar message. This indicates that the address has been set and that
communication is established.
Notes:
❏ When using the Windows 95 implementation of ARP, change the
first line to:
arp -s <IP address> <Ethernet address> <w95host IP
address>
, where
<w95host IP address>
is the IP address of
your Windows 95 host.
❏ When you execute the
ping
command for the first time, you will
experience a significantly longer response time than is usual.
❏ By using the
arp -d
command, the static entry in the arp table is
removed from the host’s cache memory.
arp -s <IP address> <Ethernet address>
ping <IP address>
arp -d <IP address>
arp -s 192.168.3.191 00-40-8c-10-00-86
ping 192.168.3.191
arp -d 192.168.3.191