Axis Communications 5600 User Manual
Page 43
Ne
tW
ar
e
Section 4: Setting Up - NetWare
AXIS 5600 User’s Manual
42
Notes:
❏ If the PSERVER_NDS parameter includes the name of a tree and
not a specific file server, RCONAG6.NLM must be running on at
least one file server in the specified tree.
❏ If the IPX and IP transport protocols are enabled in your network,
you can use AXIS NetPilot to install the AXIS 5600 and to
connect print queues. Please refer to Basic Setup with AXIS
NetPilot, on page 21 and Advanced Installation using AXIS
NetPilot, on page 38.
❏ Pure IP requires that you run NetWare 5 or higher.
PSERVER_NDS
parameter
As shown in the instructions in Installing the AXIS 5600, on page 41,
the PSERVER_NDS parameter specifies which NDS tree or file server
the AXIS 5600 will login to. It also specifies the path to the print
server object in the tree. The syntax of the PSERVER_NDS parameter
is displayed in the following examples:
Example 1:
TREE:NW5_TREE DevDept.acme
In this example a print server named DevDept, with context acme,
will login to the tree, NW5_TREE.
Example 2:
171.16.2.249 DevDept.acme
In this example a print server named DevDept, with context acme,
will login to a file server with the IP address 171.16.2.249. If you have
a DNS server on your network you can replace the IP address with the
host name.