Axis Communications 5600 User Manual
Page 81
Ma
ci
ntosh
Section 7: Setting Up - Macintosh
AXIS 5600 User’s Manual
80
Setting Parameters
In AppleTalk, you can change a limited number of the parameters of
the AXIS 5600. You can:
•
enable and disable binary data transfers for your printing
•
select the type of binary transfer protocol to use
•
specify the AppleTalk printer type
•
set the IP address
However, by assigning an IP address to your AXIS 5600, you have
access to all of print server’s parameters via any standard Web browser
or via FTP. Refer to Section 9 Management & Configuration, on page
98 for more information.
Example:
The following example describes the how you set the AXIS 5600
parameters in AppleTalk.
Important:
DO NOT use the parameter values from this example when
configuring your AXIS 5600. You should select values that are
appropriate for your printers and network settings.
Follow the instructions below:
1. Open the Chooser.
2. Select a network printer driver, any LaserWriter will do.
3. Select the printer port which name ends with "_CFG".
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText.