Axis Communications 5600 - Manual (Page 69)

Wi
n
d
ow
s
Section 5: Setting Up - Windows AXIS 5600 User’s Manual 68
Client-Server Printing:
Client Setup
Follow these steps to use your AXIS 5600 for client-server printing at a
Windows for Workgroups client:
1. In the Control Panel, select Printers.
2. Select a printer driver from the list of Installed Printers, or click
Add>> to install a new driver. Click Connect...
3. Select Network... in the Device Name list, select a local port
(LPT1 - LPT3) to redirect to your network printer.
4. In the Show Shared Printers on list, select the server from Server
Setup above.
5. In the Shared Printers list, select the printer you want to use.
6. Click OK, OK and Close.
7. Exit the Control Panel.
The client setup is completed and you can now print through your
AXIS 5600.