Axis Communications 5600 - Manual (Page 118)

Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
AXIS 5600 User’s Manual Section 9: Management & Configuration 117
Using FTP
Having assigned an IP address to your AXIS 5600, as described in
Assigning an IP address on page 25, you can change the AXIS 5600
parameter settings using the File Transport Protocol (FTP).
Editing the config file Follow the instructions below to edit the config file using FTP:
1. Log in to the AXIS 5600 by typing:
ftp <host name>
or
ftp <IP address>
in a DOS window
(Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
root
and
pass
.)
3. Download the config file to your host by typing:
get config
4. Edit the file using your preferred text editor.
5. Save the config file to the AXIS 5600 by typing:
put config CONFIG
Notes: ❏ It is important that the destination file is specified in capital
letters. Otherwise the edits are temporary and will be lost once the
AXIS 5600 has been powered down.
❏ To edit the config file from a Macintosh you will need FTP
support such as MacTCP, Fetch or Anarchie. The procedure for
editing the file is the same as described above.
The example on the next page shows how to edit the config file using
FTP from a DOS window.