Olympus LS-10S - Manual (Page 14)

14
Ge
tti
ng S
ta
rte
d
1
Notes
• If you press any button in HOLD mode, the
clock display flashes for 2 seconds, but it will
not operate the recorder.
• If HOLD is applied during playback (record-
ing), operation is disabled with the playback
(recording) state unchanged (When playback
has ended and the recording has ended due
to the remaining memory being used up, it will
stop).
• The recorder can be effectively operated via
its switch and dial, as well as the connected
exclusive remote control set RS30W (optional),
even when it is in HOLD mode.
HOLD