Olympus LS-10S - Manual (Page 23)

23
Ab
ou
t R
ec
or
din
g
2
a
b
c
REC s button
STOP 4 button
`/OK button
This can be adjusted
in a range from [0]
to [10]. The larger
the number on the
dial is the higher the
recording level will
be, and the indicator
position of the level
meter will grow
larger as well
Before starting recording, select a folder between
[ A] to [E]. These five folders can be selectively
used to distinguish the kind of recording; for ex-
ample, Folder [ A] might be used to store private
information, while Folder [ B] might be dedicated
to holding business information.
Recording
• The recording indicator light will flash and
[ ] will appear on the display.
• The voice sync level can be set when voice
sync recording is on.
• [Rec Mode] cannot be changed in the
recording standby mode or while recording.
Configure this while the recorder is stopped
( ☞ P.41, P.43).
• The various functions related to recording
can be configured to suit the recording
conditions ( ☞ P.41, P.43, P.44).
• The level indicator position of the level
meter will change in accordance with the
switching of the various settings related
to recording. Confirm the recording level
through the level meter after switching the
settings.
3
Use the REC LEVEL dial to adjust the
recording level.
1
Select the recording folder ( ☞ P.19 to
P.21).
How to change folders:
1 Pressing the LIST button at the file display
while stopped will return you back one layer
above.
Pressing the LIST button repeatedly will
bring you to the folder list display.
2 Pressing button 2 or 3 at the folder list
display will select the folders for voice
recordings.
• Newly recorded audio will be saved as the
last file in the selected folder.
• This recorder is designed to be able to
record cleanly and evenly, even in record-
ing conditions such as when the volume
of the source sound changes significantly.
However, even higher sound quality record-
ings can be achieved by adjusting the
recording level manually.
• If too big sound is input, the noise may
occur even if [Rec Level] is set to [Auto]
or [Limiter On]. Also, in certain cases the
[PEAK] indicator light, which notifies large
input, may not light. To ensure successful
recordings, we recommend that you test the
record function and volume before use.
• When [Rec Level] is set to [Auto] the record-
ing level will be adjusted automatically.
Set [Rec Level] to [Manual] when using the
recording level adjustment function and the
limiter function
( ☞ P.41, P.43).
2
Press the REC s button and prepare to
record.
• Turn the microphone in the direction of the
source to be recorded.
a Remaining recording time
b Level meter (change according to the
recording level and recording function
settings)
c Recording mode