Menu setting method, Play mode, Reverb – Olympus LS-10S User Manual

Page 45

Advertising
background image

45

Menu Setting

4

4 Play Menu

Play Mode

There are six play modes. You can select whether to play by file or folder, or all files

stored in the recorder.

Setting:

[File]: Stop after playing back the current file.

[File Repeat]: Play the current file repeatedly.

[Folder]: Play files continuously in the current folder until the last file and stop.

[Folder Repeat]: Play all files in the current folder continuously.

[All]: Play all files in the selected memory continuously and stop.

[All Repeat]: Play all files in the selected memory continuously and repeatedly.

• In

[File] mode, when the recorder comes to the end of the last file in the folder, [End] flashes

for two seconds on the display and the recorder stops at the start of the last file.

• In

[Folder] mode, when the recorder comes to the end of the last file in the folder, [End]

flashes for two seconds on the display and the recorder stops at the start of the first file

in the folder.

• In

[All] mode, after playing the last file in the folder, the recorder will start playing from the

first file in the next folder. When it comes to the end of the last file in the recorder, [End]

flashes for two seconds on the display and the recorder stops at the start of the first file

in the recorder.

Reverb

You can enjoy the reverberant sound of various space sizes such as from the recording

studio to the dome.

Setting

:

[Normal]: Disables the reverb function. Select this when playing back original

sounds as they are.

[Studio] [Club] [Hall] [Dome]: Select the preferred acoustical environment.

• When playing back WAV format files using these playback results, the sampling rate

and bit rate will be converted downward from 96 kHz to 48 kHz and 24 bit to 16 bit,

respectively.

• This function is only available during playback. This recorder cannot perform

recording by using the playback results.

• When you adjust the various sound quality settings related to playback on the

recorder, the audio output signal sent out from the EAR jack will change as well.

Menu Setting Method

Advertising