Olympus LS-10S - Manual (Page 29)

29
Ab
ou
t R
ec
or
din
g
2
[Level Fixed?] will flash
on the display.
Appears the voice sync
level in 23 steps ([01] to
[38]) on the display.
a
2
Press the REC s button and prepare to
record.
Recording
• To use voice sync recording, set [V-Sync.
Rec ] on and set the detection time ( ☞
P.44).
3
Press the 9 or 0 button to adjust
the voice sync level.
• The higher the value, the more sensitive
the recorders gets to sounds. At the highest
value, even the faintest sound will activate
recording.
a Voice sync level (moves to the right/left
according to the set level)
4
Press the REC s button again.
• Recording enters standby. [Standby]
flashes on the display and the recording
indicator light flashes.
If input meets or exceeds the voice sync
level, recording starts automatically. At this
time, the recording indicator light glows.
5
Recording stops automatically.
• If the volume is equal to or less than voice
sync level for longer than the specified time,
recording stops automatically. At this time,
the recording indicator light turns off.
• To manually stop recording, press STOP 4
button.