Pioneer VSX-828-K - Manual (Page 22)

Connecting your equipment 2 2
22
65
7
4 Note
• Due to linked operation of the HDMI control function, if a
supported TV and receiver are connected using a HDMI
cable and the TV input is changed during iPod input, the
receiver may automatically also change to TV input. If this
happens, please either change the receiver’s input back to
iPod, or turn OFF the HDMI control function (see HDMI
Setup on page 58 ).
Connecting a USB device
It is possible to play audio and photo files by connecting USB
devices to this receiver.
 Switch the receiver into standby then connect your USB
device to the iPod/iPhone/iPad terminals on the front panel
of this receiver.
• This receiver does not support a USB hub.
• For instructions on playing the USB device, see Playing a
USB device on page 30 .
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy
full-HD videos, high quality multi-channel audio, and photos
etc., with charge the battery on the receiver. Use the MHL
cable (sold separately) to connect the device.
 Switch the receiver into standby then use the MHL cable
(sold separately) to connect your MHL enabled device to the
MHL terminal on the front panel of this receiver.
• The MHL-compatible device is recharged whenever it is
connected to this unit. (Recharging is enabled only when
the unit’s power is turned on.)
• For instructions on playing the MHL-compatible device, see
Playing an MHL-compatible device on page 32 .
Connecting an HDMI-equipped component to
the front panel input
USB mass
storage device
MHL-compatible
device
MHL cable (sold
separately)
Video camera (etc.)
VSX-828_SYXE8_En.book 22 ページ ２０１３年３月１日 金曜日 午前９時１６分